HomeProductsWater Injector Systems™Water Injector Spider System™

Water Injector Spider System™

High Speed, High Reliability & Flexible Installation.

The Water Injector Spider System delivers legendary speed of fill and reliability and employs many convenience features in its design. Small diameter (1/4 inch (6.4 mm)) flexible tubing (that is crush and kink-resistant),  6-port manifolds and low profile valves make fitting onto a crowded battery top super easy.  Push-fit tubing ports and Speed Tubing™ allow for quick and easy installation, and the central manifold can be tied down on the battery top to prevent pulled tubing problems.

The systems works on the smallest 5-plate battery up to the largest industrial fork truck battery. It is especially useful where traditional single-point watering systems are hard to fit such as rapid or opportunity charge batteries with crowded tops. It is also perfect for when the battery size or layout is not known in advance; it is our preferred option over the Semi Assembled version of the Water Injector Classic System.   

If you have always loved the speed and reliability of Water Injector technology, but have not liked continuous tubing of the Water Injector Classic System, the Water Injector Spider System is for you!

The system must be used with our factory authorized Injector Water Supplies to ensure proper performance and our famous 15-second fill. 

Anatomy-Injectors (cropped) background removed).jpg

The Water Injector Spider System utilizes a manifold system and small diameter tubing to deliver water to each of its highly reliable valves.   Water flows from the input coupling and into the manifolds.  Individual runs of small diameter tubing connect each valve to the manifolds.  Water flows to each valve in parallel and the entire battery is filled in just 15 seconds!   Speed, safety and reliability are all maximized with the Water Injector Spider System.

 

 

 

Input/Operating Pressure: 25 to 35 psi (1.7 to 2.4 bar)

Acceptable Filling Temperature: 35° to 160°F (2° to 71°C)

Valve Body Material: Polypropylene

Max Valve Height above Vent: 0.85 in (2.15 cm) 

Flow Rate: 8 to 10 gpm (30 to 38 lpm) per string

System Exposure Temperature: -20° to 160°F (-29° to 71°C)

Tubing Material: Proprietary flexible PVC

Fitting Type (Compatible with Vent Opening Types): US 1/4 Turn & DIN

Maximum number of valves per input coupling: 24

Input Hose Size: 1/2 in (1.3 cm)

Weight: 1.3 lb (0.59 kg)