HomeProductsBattery Watering CartsHydroFill™ Pro - Mobile Battery Watering Cart

HydroFill™ Pro - Mobile Battery Watering Cart

Water when you need it, where you need it

Introducing the HydroFill Pro. Water when you need it, where you need it. With a huge 60 liter tank and a tactile LCD display that gives you instant feedback, the HydroFill Pro greatly improves your battery watering capability. The smart display even lets you know the purity of the water as you are topping up your batteries, making the best battery operated cart, even better. We’ve even integrated our HydroPure™ deioniser cartridge, giving you pure water for your batteries without the need to buy water or dont already have a deioniser on site.

A huge 60 liter capacity is staggering 80% increase on how much water the HydroFill Pro holds. Not only does it hold more water, it’s powered longer with a 40% increase in pump and battery performance

The HydroFill PRO is the only product with a built in smart display giving you unique real-time feedback. It shows a range of information from how much charge is remaining to how pure your water is.

The HydroFill Pro brings a new set of features to our HydroFill™ range. We’ve integrated our deioniser cartridge, giving you pure water for your batteries each and every time you need to top them up.

*Not to be used in conjunction with the Water Injector System.


HydroFill Pro

The most innovative battery watering cart available on the market combines our award winning HydroPure technology with a host of other features such as:

  • Integrated deioniser to purify water in any location.
  • A huge 60 litre tank. 
  • A tactile LCD display giving real time feedback.

An in-built tactile display screen have been designed to give you clear and concise feedback: 

  • Purity sensor showing the purity of the water within the tank.
  • Discharge indicator to show when you need to recharge the battery. 
  • Low water alert when you need to top-up the cart.
  • A diagnostics mode giving a range of information ranging from number of charges and run-time to purity and cart stops
  • Multilingual makes it internationally accessible and easy to use. 

Having everything you need at your finger tips when your filling your batteries up allows you to keep you batteries in tip top condition, helping to prolong battery life and maximise performance.

Cart Part Number: CRT-3

Timer Part Number: CRT-E208

Cartridge Part Number: PS600

Capacity: 60 l (15.8 Gallons)

Product Height: 100 cm (39.3 in)

Product Width: 35 cm (13.7 in)

Shipping Weight: 72.7kg (160.2 pounds)

Max Weight: 8kg (17.6 pounds)

Output Hose Length: 3.65m (12 ft)

Wheel size: 15 cm (5.9 in)

Wheel Type: Plastic/Rubber

Controls: Single button and 16 x 2 line OLED display

Range: Unlimited

Do I need to keep the cart plugged in?
No, the cart has an internal, rechargeable power supply.

The screen shows BATTERY LOW RECHARGE, what should I do?
Plug the power supply into the wall then into the back of the unit and leave for 13 hours to fully charge.

The screen shows WATER LOW, what should I do?
Use the correct hose with adapter ensure it's connected to the top of the cartridge to refill the cart. If you are using the HydroFill Pro without the HydroPure Deionizer Cartridge, make sure you are using a supply of deionized water to refill the cart.

The screen shows PUMP FAULT SERVICE NOW, what should I do?
Call your service engineer.

The purity rating is flashing and shows µS > 30, what does this mean?
The purity of the water in the cart is below acceptable levels, this means the HydroPure Deionizer Cartridge needs to be replaced. Once you have replaced the cartridge the purity rating should state OK. 

How do I access the diagnostics function?
Make sure the unit is off then hold the power button until the LED has flashed 10 times.

How do I change the language on the display?
Make sure the unit is off then hold the power button until the LED has flashed 20 times. Cycle through the languages by clicking the power button. Once you have cycled to the language you require, leave the unit for 30 seconds to reset. After 30 seconds, the unit will be in standby mode and will have changed the display language.

Is it possible to fill batteries fitted with a BFS system?
Yes, the cart is BFS ready.

Does the device only work with the HydroPure Cartridge inserted?
No, you can use the cart without the cartridge, although we strongly recommend filling it with a supply of deionized water.

How the HydroFill Pro works
Understanding the feedback screen on a HydroFill Pro
More Videos \/