Water your batteries from your battery extractor!
Conveniently water batteries as they are being changed with our battery extractor mounted water supply. This robust water supply features a powder-coated industrial steel frame that cradles a sturdy 20 US gallon (75.7 liter) high density polyethylene. The whole unit is secured to the back frame of a battery extractor. A submersible pump, which is mounted inside the tank, provides the water volume and pressure required by the Water Injector System™. A highly visible control unit is mounted on top of the tank and provides an on/off switch, power indication, and run dry protection. The controller also shuts the pump off after 10 seconds of non-use to save energy and conserve pump life.
System Exposure Temperature: 35° to 160°F (2° to 71°C)
Power Source: 110 VAC/8.5 Amps
Output Hose Size: 1 in (2.54 cm)
Output Hose Length: 18 ft (5.5 m)
Weight: 68 lb (30.8 kg)
Product Height: 41 in (104.1 cm)
Product Depth: 27 in (68.6 cm)
Product Width: 29 in (73.7 cm)
Capacity: 20 gal (75.7 l)
Range: 30 ft (9.15 m)
Power Cord Length: 25 ft (7.6 m)
Horse Power: 3/4 H.P.
Notes: Used for filling the Water Injector System™ from a battery extractor