HomeProductsWater Injector Systems™Booster Pump

Booster Pump

BladderTank Water Fill Assist

Booster Pump

The Booster pump is used when the in-plant water pressure is not high enough to completely fill our BladderTank products. It cannot be used to directly fill the Water Injector  System™ directly since it does not have a high enough flow rate.

A water resistant electrical box encloses a diaphragm demand pump. The pump delivers 1.5 gallons (5.7 liters) per minute and automatically turns off when the output pressure reaches 80 psi (5.5 Bar). The unit is wall mountable and requires a 110V A/C outlet. (European and international versions are also available.)

Flow Rate: 1.5 gpm (5.68 lpm)

System Exposure Temperature: 35° to 160°F (2° to 71°C)

Power Source: 110 VAC (4 Amps)

Input Hose Size: 3/8 in (0.95 cm)

Input Hose Length: 15 ft (4.6 m)

Output Hose Size: 3/8 in (0.95 cm)

Output Hose Length: 9 ft (2.7 m)

Weight: 13 lb (5.89 kg)

Product Height: 12 in (30.5 cm)

Product Length: 12 in (30.5 cm)

Product Width: 7 in (17.8 cm)

Power Cord Length: 6 ft (1.83 m)

Notes: Used for filling Bladder Tanks where the facility water pressure is insufficient