Select Your Region

     

Region:
Home > Products > Battery Watering Gun > Tank Watering Cart

Tank Watering Cart

Gun Water Supply

This 10 US gallon (37.9 liter) unit cleverly uses your building's water pressure to deliver water to your batteries wherever they are. No AC power is required to operate this unit. Simply fill the tank by connecting the input hose up to your building's water supply with the quick connect provided. When the tank is full (as indicated by the gauge on the top of the tank), disconnect the input hose and wheel the unit to the batteries that need to be filled.

The tank has “pressure memory”; water is stored in the tank at the same pressure that it went in (your building’s water pressure). The output flow rate it set to be appropriate for the Watering Gun. Since this unit is powered by the pressure in your water lines, there are no pumps which makes the unit very cost effective and reliable.

 


The pressure tank is supplied with 10 feet (3.0 meters) of output hose. Since this unit requires to electrical power its mobility range is unlimited.

A capacity gauge on the top of the tank indicates how full the tank is. The maximum capacity of 10 US gallons (37.9 liters) is achieved when the tank is pressurized to 80 psi (5.5 Bar). If you have very low water pressure or if you wish to use bottled water or some other unpressurized source you may need to use a Booster Pump.

This water supply is also compatible for use with the Stealth Watering System. Additional adaptors may be required.


System Exposure Temperature: 35° to 160°F (2° to 71°C)

Input Hose Size: 3/8 in (0.95 cm)

Input Hose Length: 9 ft (2.7 m)

Output Hose Size: 3/8 in (0.95 cm)

Output Hose Length: 10 ft (3.0 m)

Weight: 57 lb (25.7 kg)

Product Height: 41 in (104.1 cm)

Product Length: 19 in (48.3 cm)

Product Width: 17 in (43.2 cm)

Capacity: 10 gal (37.9 l)

Range: Unlimited

Wheel size: 8 in (20.3 cm)

Wheel Type: Ball Bearing

Notes: Water Supply for the Watering Gun

Part ID: CRT-10G

 

Related Products