12 Volt rechargable watering cart shown with Philadelphia Scientific Battery Watering Gun Model B sold separately
Easy to use: instructions right on the unit
Easy to Fill: large opening
Easy to transport to remote locations
Charge the unit from a standard electrical outlet with the provided charger
Handles like a hand truck
Unlimited range
9 foot hose attaches to all Philadelphia Scientific Watering Guns
On/off switch on rear of unit
Sturdy 10 gallon polypropylene tank
Specifications Capacity: 10 Gallons / 37.85 liters Range: Unlimited Height: 35 in / 88.9 cm Width: 15 in / 38.1 cm Weight: 27.3 LB / 12.38 kg Output Hose: 10 ft / 30.48 dm Wheel size: 8 in / 20.32 cm Charger: 120 VAC /220 VAC
MOBILE PRESSURE TANK FOR WATERING GUN - CRT-T10G
STURDY CONSTRUCTION – Two wheels are attached to a heavy duty tubular steel handle. At rest the wheels are off the ground, which not only provides a brake but makes the tank very easy to tilt and move with one hand. A 5/8” high-output industrial hose is used for the output, and a ball valve and flow indicator are attached to the end.
Tank Capacity
Input pressure (PSI)
Tank Capacity ( US Gal)
80
10
70
9.5
60
8
50
6
A capacity gauge on the top of the tank indicates how full the tank is. The maximum capacity of 10 gallons is achieved when the tank is pressurized to 80 psi. If you have very low water pressure, you may need to use a Booster Pump. The booster pump will also allow you to use bottled water or some other unpressurized source. To tell whether you need a Booster Pump or not, you can either connect up the tank and see how full it gets, or you can use a static pressure gauge to find out your pressure. The chart shows how much water can be stored depending on your water pressure.
Specifications Height 41 in Width 17 in Capacity 10 gal Weight 57 lbs Input Hose 9 ft Output Hose 10 ft Wheel Sized 8 in
